The Materials Handling Experts...

H. & T. Labour and Vacuumation Services Ltd

High Tip / Two Discharge Blowers / Water Jetting

Additional Features

High Tip !

 

· Our high tip unit gives added flexibility in that it will suck material and then tip in to skips or 1 tonne bags.

· Combined with our own roll on, roll off skips and skip truck this gives an extremely effective system in cases where material needs to be taken off site for disposal of recycling.

· Using this method the Disab can remain on site maximising the time spent vacuuming whilst the skip lorry does the haulage work.

Two Discharge Blowers

 

Often the material vacuumed up on site is required to be blown back in to a client’s silo.

 

Most suck and blow trucks use the same compressor for blowing as sucking.  This can cause slow discharge on silos with 4” blowing lines and problems with filter overloading on small silos with static filters.

 

To over come such problems we have fitted a second blower to our silver unit.  This second compressor delivers a smaller volume but at a higher pressure (1.7 bar maximum) the same as a bulk powder road tanker blowing system.  This compressor is selected for rapid discharge up 4” lines or into smaller silos.

 

The standard compressor is still used where a larger discharge pipe is available.

 

Many of our clients specify that product is blown back in to their systems for recycling.  We regularly and successfully blow material back in to silos or direct into process plant at heights of up to 45m.

 

 

Water Jetting

· On board high pressure water lance.

· Pressure washing plant.

· Water jetting slurries to assist vacuuming process.